Calculate total concrete edging length, material quantity, labor budget, and full 2026 USA project cost for lawns, flower beds, walkways, driveways, patios, and landscape borders.
A Concrete Edging Length Calculator estimates how many linear feet of edging you need around a lawn, garden bed, patio, driveway, or walkway. It converts shape dimensions into total perimeter, then uses edging width, depth, waste allowance, and regional rates to estimate concrete volume and 2026 project cost.
For rectangular borders, use perimeter = \(2 \times (length + width)\). For circles, use perimeter = \(3.1416 \times diameter\). For irregular layouts, measure the full outside edge with a tape, rope, or wheel and enter the total length directly.
The calculator first finds your total edging length in linear feet, then estimates concrete quantity, waste, labor, and installed cost for the USA using updated 2026 ranges.
The edging style you choose changes both labor time and finished appearance. Decorative curves, stamped textures, and color additives cost more than simple straight edges.
| Edging Type | Best For | Installed Cost | Difficulty | DIY? |
|---|---|---|---|---|
| Basic Straight Edge | Simple beds, walkways | $4.50–$6.50/LF | Low | Easy |
| Mow Strip Edge | Lawn borders, easy trimming | $5.00–$7.25/LF | Low–Moderate | Moderate |
| Curved Landscape Edge | Garden beds, trees | $5.50–$8.25/LF | Moderate | Moderate |
| Stamped Decorative Edge | Premium landscaping | $7.50–$11.00/LF | High | Difficult |
| Colored Decorative Edge | Custom curb appeal | $8.00–$12.50/LF | High | Difficult |
Regional labor differences can move installed pricing up or down even for the same edging layout. The table below shows typical 2026 USA installed ranges for standard concrete edging work.
| Region | Key States | Labor ($/LF) | Total Installed | 100 LF Estimate |
|---|---|---|---|---|
| Northeast | NY, MA, CT, NJ | $2.60–$3.80 | $5.60–$8.80/LF | $560–$880 |
| West Coast | CA, WA, OR | $2.80–$4.00 | $5.90–$9.20/LF | $590–$920 |
| Midwest | IL, OH, MI, MN | $2.10–$3.10 | $4.90–$7.60/LF | $490–$760 |
| South | TX, FL, GA, NC | $1.90–$2.90 | $4.50–$7.10/LF | $450–$710 |
| Mountain / Plains | CO, AZ, UT, NV | $2.20–$3.20 | $5.00–$7.80/LF | $500–$780 |
Use a string or flexible hose for curved beds, then straighten it and measure the full length in feet before ordering concrete edging materials.
A narrow 4″ × 5″ edging profile covers about 54 linear feet per cubic yard before waste, so long runs often need much less concrete than homeowners expect.
Most basic residential edging projects fall in the 60–180 linear foot range, especially for front walkways, garden beds, and driveway borders.
Add at least 8% to 15% overage for curves, transitions, ends, joints, and small layout adjustments. Decorative edging also needs more finishing time, which increases labor per linear foot.
Before pouring, mark the full border with landscape paint, rope, or a garden hose to verify shape and smoothness. You can also check your slab or base quantities with our concrete volume calculator or compare patio projects with a concrete patio calculator. For industry reference, many contractors also review guidance from the National Ready Mixed Concrete Association.
Helpful organizations and standards commonly used for concrete planning and installation.
The National Ready Mixed Concrete Association offers practical resources on concrete applications, installation basics, and project planning for USA contractors and homeowners.
Visit NRMCAThe American Concrete Institute publishes technical guides and standards that many professionals use for concrete design, placement, and quality practices.
Visit ACIThe Portland Cement Association provides technical education and general information about concrete materials, durability, and residential applications.
Visit PCA